SAMON GS230-HFC: detection unit with built-in sensor, for synthetic refrigerants A1 and A2L (HFC including R32 and HFO) - unit with relay output and semiconductor sensor (SC)
Samon GS230-HFC electronic gas leak detection 230 AC R404A , R507, R410A, R134a, R407C /A / F (also suitable for R22)
Microprocessor controlled with status display by means of led
Built-in service button for pause detection ring during maintenance work for up to 1 hour
Self test function to check the operation of all leds and detectors
Fail-safefunctie (error safety function). D.w.z. at power failure, cable break or faulty sensor, the detector automatically in alarm
The Basic setting of the detectors is to adapt to environmental conditions causing false alarms
With 3 relay outputs, switching capacity 230V/5A
The factory setting are on the most sensitive value set to 100-1000-2000 ppm. Possibly itself.
Time delay between detection and alerting is adjustable
Selection manual or automatic reset possible
Life sensors ca. 5 years. (CO2 sensors approx. 10 years) Moisture content: 0 ... 95% Rh (non-condensing) Advice is to HFC and NH3 models to calibrate with the yearly service tool DT 300 (N501-4275). At all detectors should be every year a simple self test function and sensor "0" setting
Type: GS230-HFC (Detector and sensor in one) Power supply: 230V AC Temperatures: -40 ° C to + 50 ° C Size H x W x D (mm): 160x130x60 Sensitivity ppm: 0-4000 Alarm levels ppm factory setting: 100 - 1000 - 2000 IP class: 54
