SAMON GSR230-HFC: detection unit with remote sensor, for synthetic refrigerants A1 and A2L (HFC including R32 and HFO) - unit with relay output and semiconductor sensor (SC)
GSR230-HFC Samon electronic gas leak detection 230 AC R404A , R507, R410A, R134a, R407C /A / F (Also suitable for R22)
Microprocessor controlled with status display by means of leds
Built-in service button for pause detection ring during maintenance work for up to 1 hour
Self test function to check the operation of all leds and detectors
Fail-safe function (error safety function). D.w.z. at power failure, cable break or faulty sensor, the detector automatically in alarm
The Basic setting of the detectors is to adapt to environmental conditions causing false alarms
With 3 relay outputs, switching capacity 230V/5A
The factory setting are on the most sensitive value set to 100-1000-2000 ppm. Possibly itself. Time delay between detection and alerting is adjustable. Selection manual or automatic reset possible. Life sensors ca. 5 years. (CO2 sensors approx. 10 years) Moisture content: 0 ... 95% Rh (non-condensing) Advice is to HFC and NH3 models to calibrate with the yearly service tool DT 300 (N501-4275). At all detectors should be every year a simple self test function and sensor "0" setting
Detector with at a distance sensor to be mounted above the blow-off conduit. Power supply: 230V AC Temperatures: -40 ° C to + 50 ° C Size H x W x D (mm): 160x130x60 Sensitivity ppm: 0-4000 Alarm levels ppm factory setting: 100 - 1000 - 2000 IP class: 54
